Connectable to a wide range of devices
Built-in Bluetooth ® wireless technology facilitates connection with a wide range of devices.
Improvement in workability with wireless connection
Because there are no cables, the GT10B can be installed anywhere (Min. 10m, with no obstractions).
Can be connected by simply scanning the bar code underneath the communication unit.
4 data-saving functions
No connection error
Multiple units can be used simultaneously by specifying where to connect. Transmission Confirmation (planned)
Transmission Confirmation (planned)
Accurate data transmission possible with ACK/NAK protocol built-in.
Data Check (planned)
Error correction code included in the data helps prevent missing and substitution of the data.
Prevents scanning in the event of disconnection.
Function to notify decline in battery voltage
Buzzer and LED alarm function to warm of decline in battery voltage(planned).
An orange LED will flash at 5-second intervals and a buzzer will sound 3 times.
Extended operating time
Twenty hours of operating time possible eben with a constant Bluetooth ®connection (at one scan per 5 seconds).
Battery can be charged in approx. 2.5 hrs with the exclusive unit charger (CH-GT10N).
Outstanding scanning capability
Scanning from a distance of over 1 m possible using CCD technology (with 1.0 mm narrow bar codes).
Stable scanning of broad barcodes such as EIAJ labels or EAN128.
World- leading impact resistance
With a stronger body and the use of impact-resistant rubber, the scanner can survive a 2 m drop-the highest standard in the world.
Superior environmental endurance
After many years of developing high quality technology, IEC International Standards Protection Class IP54 (equivalent to JIS spash resistance) has been achieved, preventing water and dust from infiltrating the scanner.
Tri-color Extra Bright LED
Tri-color LED display that shows operation status Vibrator Function
Scan completion confirmed by vibration
Adjustable Buzzer Volume
3 levels of buzzer volume to suit the surrounding environment
Use of magic key
Wireless connection control
Wireless connection can be disconnected by pressing and holding the magic key for a few seconds. Reconnect by switching the trigger ON.
Transmission of designated characters
Data that is already stored (eg operations initiation code) can be sent by switching the magic key ON.
Retransmission of scanned data
Scanned data can be retransmitted when the magic key is ON so the bar code does not need to be repeatedly scanned.
Wide range of Functions
Bar code comparison
Determines if a bar code being scanned matches a master bar code redistered in the GT10B.
Data Editing Function
Sorts scanned barcode data and prints out only necessary data.